Avanti(R) J-HC High Capacity Centrifuge, 50 Hz, 230 V, 24 A
Product No:367502
The J-HC High Capacity Centrifuge provides you with a complete solution for batch bioprocessing with performance and biocontainment capabilities unattainable with high-speed or super-speed centrifuges. Spin a maximum of nine liters at speeds of 5,000 RPM and 7,480 x g for greater sample throughput. Process up to 36 liters per hour when harvesting bacteria. Enhanced operator safety is provided with disposable HarvestLine System Liners. Features include a high-torque, energy efficient drive for the fastest acceleration and deceleration possible with gentle precision. Also, advanced programmability, automatic rotor identification and imbalance safety check, CFC-free refrigerants, Friction Reduction System (FRS) for optimum temperature control, low energy consumption and low heat output. Includes Paperless documentation, data management, and current good manufacturing practice (CGMP) compliance with the Spintrace II network software. The J-HC is the highest capacity centrifuge in its class and provides the fastest accel and decel times with exclusive SR (Switched Reluctance) Drive technology.
Resources + Tools
Specifiche
| Platform | Avanti |
| Maximum Speed | 10,000 RPM |
| Maximum g-Force | 17,100 xg |
| BioSafe | No |
| Acceleration | Maximum or Slow |
| Deceleration | Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off |
| Timed Run | 1 min to 99 hrs, 59 mins (timed run), Total centrifuge effect (g-seconds) or Continuous hold |
| Max Capacity Volume Range | 1 - 9 L |
| Refrigeration System | Non-CFC, non-ozone depleting refrigerant |
| Temperature Range(s) | 10°C - 40°C in 1 degree increments |
| Friction Reduction System | 190 mm (7.5 in.) Hg |
| Pollution Degree | 2 |
| Environmental Conditions | -10°C to 40°C in 1° increments |
| Installation Category | II |
| Material(s) | Steel, Structural Foam |
| Finish | Powder Coat Paint |
| Weight | 300 kg |
| Width | 71 cm |
| Depth | 86 cm (102.0 cm with air direviter extending) |
| Height | 86 cm (152 cm with door open) |
| Clearances | 7.6 cm (sides) & 16 cm (rear) |
| Humidity Restrictions | < 95% (non-condensing) |
| Power Requirements | 220 VAC, 50 Hz |
Related Products or Parts
JS-4.2 Swinging-Bucket Aluminum Rotor and Buckets
JS-4.2 Swinging-Bucket Rotor (Windshielded). Windshielded, six-place rotor with aluminum rotor yoke and removable aluminum swinging buckets. Buckets are interchangeable with Microplate Carriers 358682 for spinning microtiter plates and MiniTube Racks. Holds up to six liters, six blood bags, or six microtiter plate carriers. Accepts all Multi-Disc Adapters. A kit is available to convert this rotor to a JS-4.2SM: See Part Number 356501. Major applications: Rapid sedimentation of protein precipitates, large particles, cells, and cell debris. It can be used for binding studies and separating serum from whole blood. For use in Avanti J-HC and J6 Series centrifuges only.
J-LITE JLA-8.1000 Fixed-Angle Aluminum Rotor- 6 x 1,000 mL, 8,000 rpm, 15,970 x g
For use in Avanti J-26 XP Series and Avanti J-26S Series centrifuges. Major applications: General purpose, large-volume processing, pelleting of bacteria, cell organelles, viruses, and precipitates.
JS-4.2A ARIES(TM) Swinging-Bucket Rotor and Buckets
Windshielded, six-place rotor with aluminum rotor yoke and removable aluminum swinging buckets. Holds up to six liters (6 x 1 L), six blood bags, or six microtiter plate carriers. Major applications: Rapid sedimentation of protein precipitates, large particles, cells, and cell debris. It can be used for binding studies and separating serum from whole blood. For use in J6 Series centrifuges only.
JS-5 Swinging-Bucket Rotor
JS-5.0 Swinging-Bucket Rotor Assembly with Labware Kit, Anodized Aluminum. Four-place swinging-bucket rotor. Includes rotor body and lid with four removable buckets and labware kit.
Labware kit includes: (Part Number, Description): 369257, Cover Gasket, Red, for use without liners (set of 4); 369261, Cover Gasket with liners; 369261, Green (set of 4); 368148, Air-Vent Filter (set of 60); 367891, Spatula; 2 Cup Racks 4 J-Wide cups and cup covers with plugs.
Major applications: Separating bacterial, yeast, and tissue homogenates; harvesting cultures. For use in Avanti J-HC centrifuges.
Labware kit includes: (Part Number, Description): 369257, Cover Gasket, Red, for use without liners (set of 4); 369261, Cover Gasket with liners; 369261, Green (set of 4); 368148, Air-Vent Filter (set of 60); 367891, Spatula; 2 Cup Racks 4 J-Wide cups and cup covers with plugs.
Major applications: Separating bacterial, yeast, and tissue homogenates; harvesting cultures. For use in Avanti J-HC centrifuges.
